Panasonic KX-TCD440AL, KX-TCD445AL Call options, Selecting the display language, Setting call bar

Press {j}.

TCD440_445AL(E).book Page 22 Monday, May 24, 2004 1:17 PM

Useful Telephone Settings

4	Press {v} repeatedly to display “TALK	“OFF”, then press {>}.
5	MODE”, then press {>}.	7 Press {ih}.
	Press {v} repeatedly to select the	Note:
	desired setting, then press {>}.	L While this feature is turned on, the
6	Press {ih}.
		following will be displayed.
Selecting the display language
10 display languages are available.
		Storing the direct call number
1	Press {j}.
		Direct call allows you to dial a preset phone
2	Press {v} repeatedly to display
		number simply by pressing {C} or {s}. No
	“SETTING HS”, then press {>}.	dialling is necessary.
3	Press {v} repeatedly to display
		1 Press {j}.
	“DISPLAY OPT”, then press {>}.	2 Press {v} repeatedly to display
4	Press {v} repeatedly to display
		“SETTING HS”, then press {>}.
	“LANGUAGE”, then press {>}.	3 Press {v} repeatedly to display “CALL
5	Press {v} repeatedly to select the
		OPT”, then press {>}.
	desired language, then press {>}.	4 Press {v}repeatedly to display “DIRECT
6	Press {ih}.
		NO”, then press {>}.
Note:		5 Enter a phone number (24 digits max.).
L If you select a language you cannot read,
		L To correct a mistake, press {C/T}.
	reset the handset to its default settings
		Digits are cleared from the right.
	(page 23).
		6 Press {j} 2 times.
Call options		7 Press {>} to select “ON”, then press
		{ih}.
Setting call bar		Note:
This feature prohibits making outside calls.		L When this feature is turned on, only the
		direct call number can be called.
When call bar is turned on, only intercom
		L While this feature is turned on, the
calls and emergency calls can be made. To
store emergency numbers, see page 26.		following will be displayed.

1

2Press {v} repeatedly to display

3	“SETTING HS”, then press {>}.	Turning direct call on/off
	Press {v} repeatedly to display “CALL	1	Press {j}.
	OPT”, then press {>}.	2	Press {v} repeatedly to display
4	Press {v} repeatedly to display “CALL
			“SETTING HS”, then press {>}.
	BAR”, then press {>}.	3	Press {v} repeatedly to display “CALL
5	Enter “0000” (default handset PIN).
			OPT”, then press {>}.
	L If you changed PIN, enter it (page 23).	4	Press {v} repeatedly to display “SET
6	Press {v} repeatedly to select “ON” or
			DIRECT”, then press {>}.

22