Panasonic KX-TCD445E, KX-TCD440E operating instructions Answering system KX-TCD445 only

Useful Information

redialled. Redial the number manually.

The handset beeps intermittently and/or 074 flashes.

LFully charge the batteries (page 7).

I fully charged the batteries, but 074 still flashes.

LClean the charge contacts and charge again (page 7).

LIt is time to replace the batteries (page 8).

7 disappears and the unit stops charging when the handset is on the base unit.

LNickel cadmium batteries are inserted when the battery type is set to “NI-MH”. Change the battery type setting to “NI- CD” (page 21).

Caller information is not displayed.

LYou must subscribe to Caller ID service.

While viewing caller information, the display returns to standby mode.

LDo not pause for over 60 seconds while searching.

I cannot register a handset to a base unit. LThe maximum number of base units (4) are already registered to the handset. Cancel unused base unit registrations

from the handset (page 31).

LThe maximum number of handsets (6) are already registered to the base unit. Cancel unused handset registrations from the base unit (page 31).

LYou entered the wrong PIN number. If you forget your PIN, consult your nearest Panasonic service centre.

LLocate the handset and the base unit away from other electrical appliances.

Answering system (KX-TCD445 only)

The answering system is turned on, but caller messages are not recorded.

LThe recording time is set to “GREET

ONLY”. Select “1 MINUTE” or “UNLIMITED” (page 29).

LMessage memory is full. Erase unnecessary messages (page 26).

I cannot operate the answering system with the handset.

LAnother handset user is using the answering system or changing base unit settings. Wait for the other user to finish.

LA caller is leaving a message. Wait for the caller to finish.

LThe handset is too far from the base unit. Move closer.

I cannot operate the answering system remotely.

LYou are entering the wrong remote access code. Turn remote operation on using the handset and select a new code (page 27).

LYou are pressing the dial keys too quickly. Press each key firmly.

LThe answering system is turned off. Turn it on (page 25, 28).

LYou are using a pulse telephone. Try again using a touch tone phone.

While recording a greeting message or listening to messages, the unit rings and recording stops.

LA call is being received. Answer the call and try again later.

Helpline Tel. No. :U.K. 08700 100 076 R.O.I. 01289 8333 35