Multi-Unit User Operations
Handset Registration to a Base Unit
The handset supplied with the base unit is already registered. If an optional handset is purchased, it must be registered as follows.
Charge the optional handset batteries for 7 hours before initial use.
Handset registration must be completed within 1 minute after pressing the 
.
If over 1 minute, press 
then start over again.
To exit the operation, press 
at any time.
1 | Press JOYSTICK | 2 Select “ |
| Setting | 3 | Select |
| ||||||
| (or move). | Handset | ”. |
|
| “Registration”. |
4 Select “Register H/set”.
6 Select the desired base unit.
5 Press and hold 
on the Base Unit (for about 3 seconds) until the tone sounds.
•If all registered handset(s) start ringing (paging), press 
to stop paging then start over again.
7 PIN.Enter | 8 Press JOYSTICK. | ||
(Factory Preset 0000) |
|
|
|
Cordless Telephone
When a handset is registered successfully, a confirmation tone sounds and the “
” icon is displayed.
•If you enter the incorrect Base Unit PIN, the error tone sounds and repeat from step 1.
•To register an handset to more than one base unit, repeat from step 1 with the other base unit(s).
•The handset main menu may changes corresponding to the base unit registered to.
Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333 | 63 |
