This unit is compatible with a Caller ID service offered by your telephone
company. If you should subscribe to a Caller ID service, the calling party’s
information will be shown on the handset display after the first ring.
You cannot access the Caller ID service while using the handset and base unit
for an internal call.

How Caller Information is Displayed when a Call is Received

• Incoming Call
• Caller’s phone number is displayed after first ring.
1.ZO(Length of call is displayed).
• Caller’s phone number cannot be displayed in the following
cases:
– If the caller dialled from an area which does not provide a
Caller ID service, the display will show.
• – If the caller has requested not to display his/her phone
number, the display will show.
• If your unit is connected to a telephone line or a PBX which
does not support Caller ID service, you cannot access
those services.

Checking the Number of New Calls

In the standby mode, when new calls have been received, the
display shows the number of new calls.
• For example if you have received 10 new calls the display will
show the following.
outof area
ÂÊÁËÈÍ
ÎÏÔÓÒ
Caller ID Service ➡
19
888888888888
ÂÊÁËÈÍ
ÎÏÔÓÒ
0123456789
ÂÊÁËÈÍ
ÎÏÔÓÒ
00-00-00
ÂÊÁËÈÍ
ÎÏÔÓÒ
private
ÂÊÁËÈÍ
ÎÏÔÓÒ
-1-888888810
ÂÊÁËÈÍ
ÎÏÔÓÒ
Caller ID, where available, is a telephone company service. After subscribing
to Caller ID, this phone will display the caller’s phone number.
31939_KX-TCD700CX_Czech 18/6/01 1:54 pm Page 19