Panasonic KX-TCD700BX Special Features

Special Features ➡
How to Use the Pause Feature
We recommend you insert “X” if a pause is required for dialling with a PBX or to
access a long distance service. (When Xis pressed, ‘p’is displayed on LCD).
Eg. Line access number I(PBX).
1. ZI, Xand then phone number.
2. ZO
(After a few seconds, display will start showing the length of the call).
• Pressing Xonce creates a pause.
This prevents misdialling when you redial or dial a stored number.
• Pressing Xmore than once increases the length of the pause between
numbers.
Temporary Tone Dialling
(For Rotary or Pulse Service Users)
ZJbefore entering access numbers which require tone dialling.
• The dialling mode changes to tone. You can enter numbers to access an
answering service, electronic banking service, etc. When you hang up, the
mode will return to pulse.
31939_KX-TCD700CX_Czech 18/6/01 1:54 pm Page 25
Using the Recall Feature
Mis used to access special telephone services (optional) such as call waiting
(When Mis pressed ‘f’is displayed on LCD). Contact your telephone
company for details.
Example: Call waiting.
When a call waiting tone is heard during a conversation:
a) To hold the existing call and accept the waiting call.
ZM
• Each time you ZM, you can switch between the first and second call.
• Depending on the provider, you may need to enter a code after pressing M.
Follow the instructions given by your provider.
b) To accept the waiting call and hang up the existing call.
ZP. When the unit rings, ZOto answer the new call.
c) To reject the waiting call.
Wait for the call waiting to time out. This will take about 40 seconds. If your
unit is connected to a PBX, pressing Mallows you to access some features
of your host PBX such as transferring an extension call.
25
(For Analog PBX Line/Long Distance Service Users)