Panasonic KX-TCD705BX operating instructions Base Programming, Bell Selection

KX-TCD705BX 12/7/01 2:28 pm Page 43

Base Programming ➡

You can program the base unit according to your needs.

While programming:

•When programming is completed, a confirmation tone sounds and display returns to the function menu.

•You can exit the programming mode any time by pressing P.

◆◆ To change the Initial Settings

Standby Mode

Base 1		1	2	3
10 New	Calls	 Yor V 	S/ U	 Yor V ‘Input Command’
A12.05	13:58
			Select
ÎÏÔÍ Á Ò

‘Setting Base’

◆Bell Selection

There are three choices for Bell Selection when a call is being received:-

•all handsets ring.

•the selected handset(s) ring(s).

•the selected handset rings first. Then if it does not answer, all other handsets will

ring.

The factory preset is ‘All handsets’. To change the bell selection, program as follows:

• Select ‘All Handsets’ to ring.

Follow	 A 	Enter	 A 
steps 1 to		Base PIN		Yor V
3 above		(4-digits)
• Select ‘Selected Handset(s)’ to ring.
Follow		Enter	 B 		A-F 
steps 1 to	 A  Base PIN
						Yor V
3 above		(4-digits)	The current
					Select
			selected handset(s)		handset(s) to
			flash(es).		ring.

• Select ‘Selected’ then ‘All Handsets’ to ring.

stepsFollow A BaseEnter		 C 	A-F			A-F
				 Yor V			 Yor V
1 to 3	PIN	The current	Select			Select
above	(4-digits) selected		handset(s)			number of
		handset(s)	to ring.		rings.
		flash(es).

Chapter 4

43