KX-TCD705BX 12/7/01 2:28 pm Page 12

Basic Start-up Operations

Note: Zshows that you should press the following key(s).

Turning the Power On

Base 1

10 New Calls

ÎÏÔÍ Á Ò

1.Zand hold P

A confirmation tone sounds.

All possible configurations briefly appear.

When button is released, the display will change to the standby mode.

The current connected base unit number is displayed

You can choose whether to display the base unit number, handset number or no display in the standby mode (see page 38).

The number of New Caller ID calls received are displayed.

Making a Call

(For further information on making calls, see pages 13-16)

1.ZO or %.

2.Dial a phone number.

The dialled number is displayed.

(If a number is entered incorrectly, ZP).

After a few seconds, the display will start showing the length of the call.

Terminating a Call

1.To hang up, ZP.

After a few seconds, the display returns to the standby mode.

If the handset is placed on the base or charger during a call, the call is disconnected.

The dialled number is stored in the redial memory.

Answering a Call

(For further information on answering calls, see page 17.) During Incoming call:

1.ZO

You can also answer a call by pressing any dialling button Kto I, $, L or N(-Any Key Answer).

Or Z%and when the other party answers, talk into the microphone. After a few seconds, the display will start showing the length of the call.

Turning the Power Off

Make sure that the unit is in the standby mode.

1.Zand hold Puntil a long beep sounds.

The display will go blank. (On location of the handset in the base unit, the battery icon will display even after power off).

12

Page 12
Image 12
Panasonic KX-TCD705BX operating instructions Basic Start-up Operations