➡Handset Programming
40
◆Setting Time Alarm
The handset(s) will sound an alarm at a preset time for 30 seconds once or everyday.
To set the time, see below:-
S/UYor VS/UYor V<Enter Time> Yor VS/UYor V
Select
‘Time Alarm’
Select ‘Set
Alarm Time’
NOTE: If time has
previously been
set, it will be
displayed.
Select
‘Save’
To Stop the Alarm
When the alarm sounds, press any dialling button Kto I, $, Lor O to
stop alarm.
The alarm time turns off and the display returns to the standby mode. If ‘Once’is
selected, the setting is automatically turned off.
If the unit is in the talk, speakerphone or intercom mode during the alarm time, the
alarm will not sound. After finishing, the alarm will start ringing.
In the ‘Setting Handset’mode
◆Setting Direct Call Number
S/UYor VS/U Y<Enter Phone No> YS/UYor V
Select ‘Call
Option’
Select
‘Direct
Call No.’
NOTE: If number has
previously been entered,
the number is displayed.
To edit the number, see
page 20.
Select
‘Save’
In the ‘Setting Handset’mode
You can store one number in the Direct Call memory. This feature allows you to make a
call easily by pressing Oor %.Incoming calls are accepted.
Dialling the Stored Number
1. Make sure that “ ” is displayed in the standby mode.
2. Z O or%.
The number stored in the direct call memory is dialled automatically.
When the handset is in the ‘Direct Call’mode, it is not possible to make any
calls until direct call is cancelled. This also includes emergency calls.
• To set the alarm ON/OFF, etc. see page 37.
• To set the Direct Number ON/OFF, see page 38.
KX-TCD705BX 12/7/01 2:28 pm Page 40