Panasonic KX-TD7690 manual Placement, For best performance

Important Information

Placement

1)Do not place heavy objects on top of this unit.

2)Care should be taken so that objects do not fall onto, and liquids are not spilled into, the unit. Do not subject this unit to excessive smoke, dust, mechanical vibration or shock.

3)Place the unit on a flat surface.

For best performance

1)If noise prevents the conversation from being understood at the handset, approach the Cell Station to lessen the noise.

2)The handset should be used at the HIGH volume setting when the reception tone is difficult to hear.

3)The handset should be fully recharged on the charger when “CHARGE BATTERY” is

displayed and/or “ (needs to be changed)” flashes.

4)The handset antenna should not be touched during use because of its high sensitivity.

5)The maximum calling distance may be shortened when the unit is used in the following places: near obstacles such as hills, tunnels, undergrounds, near metal objects such as wire fences, etc.

Medical-consult the manufacturer of any personal medical devices, such as pacemakers, to determine if they are adequately shielded from external RF (radio frequency) energy. (The unit operates in the frequency range of 2,401MHz to 2,480MHz, and emits 0,40 watts of RF [radio frequency] power.) Do not use the unit in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF (radio frequency) energy.

WARNING:

TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR ANY TYPE OF MOISTURE.

•Keep the unit away from heating appliances and electrical noise generating devices such as fluorescent lamps and motors.

•The unit should be kept free of dust, moisture and vibration, and should not be exposed to direct sunlight.

•Do not use benzine, thinner, or any abrasive powder, to clean the cabinet. Wipe it with a soft cloth.

•The unit should be situated so that the location or position does not interfere with its proper ventilation. Allow 10 cm (4 inches) clearance around the unit.

47