Useful Information
35
Telephone
Problem Cause & solution
I cannot make or receive calls. LThe AC adaptor or telephone line cord is not
connected. Check the connections.
LIf you are using a BT double adaptor to connect the
unit, remove the adaptor and connect the unit to the
phone wall socket directly. If the unit operates
properly, check or replace the adaptor.
LDisconnect the base unit from the telephone line
and connect the line to a known working telephone.
If the working telephone operates properly, contact
our service personnel to have the unit repaired. If
the working telephone does not operate properly,
contact your service provider.
LThe call bar feature is turned on. Turn it off (page
18).
LYou dialled a call restricted number (page 24).
LThe key lock feature is turned on. Turn it off (page
12).
The unit does not ring. LThe ringer volume is turned off. Adjust the handset
ringer volume (page 17) and the base unit ringer
volume (page 22).
LThe night mode feature is turned on. Turn it off
(page 17, 22).
The batteries should be charging
but the battery icon does not
change.
LClean the charge contact and charge again (page
8).
LThe AC adaptor is disconnected. Plug in the AC
adaptor.
A busy tone is heard when {C} is
pressed.
LThe handset is too far from the base unit. Move
closer and try again.
LAnother handset is on an outside call. Wait for the
other user to complete the call.
Static is heard, sound cuts in and
out. Interference from other
electrical units.
LLocate the handset and the base unit away from
other electrical appliances.
LMove closer to the base unit.
LYour unit is connected to a telephone line with
ADSL (JetStream) service. We recommend that
you contact your ADSL serv ice provider to have an
ADSL Splitter installed. We do not recommend the
use of generic ADSL filters.
The handset stops working while
being used.
LDisconnect the AC adaptor and turn off the
handset. Connect the AC adaptor, turn on the
handset and try again.