3Enter “0000” (default base unit PIN). LIf you changed the PIN, enter it (page
25).
4Select “Other Options”, then press {>}.
5Select “Repeater Mode”, then press {>}.
6Select “On” or “Off”, then press {>}.
7Press {ih}.
Note:
LAfter turning repeater mode on/off, you will not be able to make or receive calls for a few moments.
Intercom between handsets
Intercom calls can be made between handsets in the same radio cell, but not between handsets in different radio cells. Example: When handset 1 calls handset 2
1Handset 1:
Press {INT} and {2} (desired handset number).
2Handset 2:
Press {C} to answer.
3When finished talking, press {ih}.
Transferring calls between handsets
Outside calls can be transferred between 2 handsets in the same radio cell. Example: When handset 1 transfers a call to handset 2
1Handset 1:
During an outside call, press {INT} and {2} (desired handset number).
LThe outside call will be put on hold.
LIf there is no answer, press {INT} to return to the outside call.
2Handset 2:
Press {C} to answer the page.
LHandset 2 can talk with handset 1.
3Handset 1:
To complete the call transfer, press {ih}.
Transferring a call without speaking to the other handset user
1During an outside call, press {INT}, then press the desired handset number.
LThe other handset rings if it is within range of the base unit and turned on.
2Press {ih}.
LThe outside call rings at the other handset.
Note:
Lkflashes to indicate the outside call is on hold.
LIf the other handset user does not answer the call within 1 minute, the call will ring at your handset again.
30
