Preparation
7
Displays
Display icons
Various icons appear on the handset display
to indicate the current status of the unit.
ConnectionsWhen the AC adaptor is connected, a short
beep will be heard. If it is not heard, check
the connections.
Important:
LUse only the AC adaptor and telephone
line cord supplied with this unit .
Note:
LAfter connection, you must charge the
batteries to make or answer calls (page
8).
LNever install telephone wiring during a
lightning storm.
LThe AC adaptor must remain connected
at all times. (It is normal for the adaptor to
feel warm during use.)
LThe AC adaptor should be connected to a
vertically oriented or floor -mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight
of the adaptor may cause it to become
disconnected.
Display
icon
Meaning
wWithin range of a base unit
LWhen flashing: Handset
is searching for base unit.
(out of range of base unit,
handset is not registered
to base unit, no power on
base unit)
LHandset is accessing base
unit. (intercom, paging,
changing base unit settings,
etc.)
kHandset is on an outside
call.
oCall bar is on. (page 19)
5Battery strength
[VE] Voice enhancer is set to
high or low tone. (page 12)
[N] Night mode is on. (page 18)
[X] Key lock is on. (page 12)
[2] Handset number: The left
icon shows handset 2
example. (page 18)
0New call minder message
received (call minder users
only; page 27)
Line is being used by
another handset.