12
Useful Telephone Settings
*1 Call bar feature prohibits making outside calls. When call bar is turned on, only emergency
calls can be made. To store emergency numbers, see page 13.
*2 If you forget your PIN, consult your nearest Panasonic service centre.
*3 Direct call feature allows you to dial a preset phone number simply by pressing {C}. No
dialling is necessary.
*4 If you change the PIN, please write down your new PIN as the unit will not reveal the PIN
to you.
*5 Auto talk feature allows you to answer calls simply by lifting the handset off the base unit
or charger. You do not need to press {C}.
Guide to base unit settings
To customise the base unit:
1{j/OK}
2Press {e} or {v} to select “SETTING BS”. i {>}
L“INPUT CODE” is displayed.
3Enter the desired code number. Follow the instructions in the “Feature” column of the
chart.
LTo exit the operation, press {ih}.
OTHER OPT HSPIN CHANGE Change handset PIN (“0000”).*4
−Enter the current 4-digit handset PIN.*2
−Enter the new 4-digit handset PIN.
−Enter the new 4-digit handset PIN again.
AUTO TALK Auto talk on/off (“OFF”)*5
RESET HS ————— Reset handset to its default settings.
−Follow steps 1, 2, and 3.
−Enter handset PIN (default: “0000”).*2
−{v} i {>}
Code No. Feature (Default setting)
{0}Reset base unit to its default settings.*1
−Enter base unit PIN (default: “0000”).*2 i {>}
{3}Recall time (600 ms)*3
−Enter base unit PIN (default: “0000”).*2 i {2} i {1}
−Select the desired setting by pressing {1} for 100 ms or {2} for 600
ms. i {>}
{5}Change base unit PIN (“0000”).*4
−Enter the current 4-digit base unit PIN.*2
−Enter the new 4-digit base unit PIN.
−Enter the new 4-digit base unit PIN again.
Handset settings
menu
Sub-menu Feature (default setting)
TG1811_1812_1813NZ(e-e).book Page 12 Friday, May 12, 2006 3:51 PM