Preparation

internal parts becoming accessible, disconnect the power supply cord immediately and return this unit to an authorised service centre.

L Disconnect the telecom connection before disconnecting the power connection prior to relocating the equipment, and reconnect the power first.

L No “111” or other calls can be made from this device during a mains power failure. This equipment shall not be set to make automatic calls to the Telecom “111” Emergency Service.

L To minimise the possibility of lightning damage, when you know that a thunderstorm is coming, we recommend that you:

Unplug the telephone line cord from the phone jack.

Unplug the AC adaptor from the AC power outlet.

L The earpiece on the handset is magnetised and may retain small metallic objects.

L This equipment has been tested and found to comply with AS/NZS 3548: 1995 limits for electromagnetic interference. Any modifications to any part of the system or to any peripherals may void the EMC compliance of the system or the peripherals.

L Not all telephones will respond to incoming ringing when connected to the extension socket.

L This equipment may not provide for the effective hand-over of a call to another device connected to the same line.

Important notice:

L Under power failure conditions, this telephone may not operate. Please ensure that a separate telephone, not dependent on local power, is available for emergency use.

Connections

Base unit

Hooks

To telephone network

(220240 V,

50 Hz)

Use only the included AC adaptor and telephone line cord.

Charger (KX-TG1812 and KX-TG1813 only)

Hooks

(220–240 V, 50 Hz)

Use only the included AC adaptor.

Note:

L Never install telephone wiring during a lightning storm.

L Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.

L The unit will not work during a power failure. We recommend connecting a standard telephone to the same telephone line or to the same telephone jack using a BT double adaptor.

L The unit is not designed to be used with

5

Page 5
Image 5
Panasonic KX-TG1812NZ, KX-TG1811NZ Connections, Important notice, Base unit, Charger KX-TG1812 and KX-TG1813 only