6
Preparation
rotary (pulse dialling) services.
If you subscribe to an ADSL service
LPlease attach a noise filter (contact your
ADSL service provider) to the telephone
line between the base unit and the
telephone line jack in the event of the
following:
−Noise is heard during conversations.
−Caller ID features (page 14) do not
function properly.
Location
For maximum distance and noise-free
operation, place your base unit:
−Away from electrical appliances such as
TVs, radios, personal computers or other
phones.
−In a convenient, high and central location.
Battery installation
Important:
LWipe the battery ends (S, T) with a dry
cloth.
LInstall the batteries without touching the
battery ends (S, T) or the unit contacts.
Insert the batteries negative (T) terminal
first. Close the handset cover.
Note:
LUse only the included rechargeable
batteries (page 3, 4).
Turning the power on/off
Power on
LPress {ih} for about 1 second.
Power off
LPress {ih} for about 2 seconds.
Battery charge
Place the handset on the base unit or
charger for about 7 hours before initial
use.
Battery strength
Panasonic Ni-MH battery performance

Telephone

line cord

Noise filter

(For ADSL users)

Battery icon Battery strength
054Fully charged.
5High
6Medium
7Low
074Needs to be charged.
Operation Operating time
In continuous use 10 hours max.
In continuous standby
mode
120 hours max.
TG1811_1812_1813NZ(e-e).book Page 6 Friday, May 12, 2006 3:51 PM