8
Preparation
Symbols used in these operating instructionsDisplay language
1{j/OK}
2Press {e} or {v} to select “SETTING
HS”. i {>}
3Press {e} or {v} to select “DISPLAY
OPT”. i {>}
4Press {e} or {v} to select “LANGUAGE”.
i {>}
5Press {e} or {v} to select the desired
language. i {>} i {ih}
Note:
LIf you select a language you cannot read,
press {ih}, {j/OK}, press {v}, press
{>}, press {v} 3 times, press {>}, press
{v} 2 times, press {>}, select the
desired language, then press {>}. Press
{ih}.
Date and time
1{j/OK}
2Press {e} or {v} to select “SETTING
BS”. i {>} i {*}
3Enter the current hour and minute (24-
hour time entry).
LIf you make a mistake, press {C}.
Digits will be cleared from the right.
4{>} 2 times i {*} 2 times
5Enter the current day, month, and year.
LIf you make a mistake, press {C}.
Digits will be cleared from the right.
6{>} i {ih}
+For call minder (page 14)
5Battery strength
Call bar is on (page 11).
Direct call is on (page 11).
Key lock is on (page 9).
Ringer volume is off (page
11).
Displayed when you press
{#}.
If “BS NO” is selected for
standby mode display (page
11) and the current base unit
number is 1, “-1-” is
displayed.
If “HS NO” is selected for
standby mode display (page
11) and the current handset
number is 2, “[2]” is
displayed.
4 new calls
When new calls have been received, the
display will show the number of new calls.
Symbol Meaning
{j/OK}Press {j/OK}.
iProceed to the next
operation.
“ ” Select the words in quotations
shown on the display (e.g.,
“SETTING HS”) by pressing
{e} or {v}.
Icons Meaning
TG1811_1812_1813NZ(e-e).book Page 8 Friday, May 12, 2006 3:51 PM