L

Base Unit Settings

22
Base unit settings
LUse the handset to customise the base unit.
LWhen customising the base unit, the current item or setting is highlighted.
To customise the base unit:
1" (middle soft key)
2Select L by pressing {^}, {V}, {<}, or {>}. i # (middle soft key)
3Press {^} or {V} to select the desired item in the base unit settings menu. i #
4Press {^} or {V} to select the desired item in the sub-menu. i #
5Press {^} or {V} to select the desired setting then press # or follow the instruction in the
“Feature” column of the chart.
LTo exit the operation, press {ih}.
*1Change the recall time, if necessary, depending on the requirements of your service
provider/telephone company or PBX.
*2If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN
to you. If you forget your PIN, consult your nearest Panasonic service centre.
Base unit settings
menu
Sub-menu Feature (default setting)
Ringer Volume — Base unit ringer volume (Medium)
Call Options Recall/Flash Change the recall time (“600 msec.”).*1
Area Code page 23
Call Restrict page 23
Other Options Base Unit PIN Change base unit PIN (“0000”).*2
– Enter the current 4-digit base unit PIN.
i Enter the new 4-digit base unit PIN.
i #
Repeater Mode (“Off”): page 29
TG1861NZ(e).book Page 22 Thursday, June 1, 2006 4:54 PM