Preparation
For assistance, please call 1-800-211-PANA (7262). 11
Battery charge
Place the handset on the base unit for 6
hours before initial use.
LThe unit will beep once, the CHARGE
indicator will light, and “Charging” will
be displayed.
LCharge completed” is displayed
when the battery has been fully charged.
The CHARGE indicator will remain lit.
Note:
LTo ensure the battery charges properly,
clean the charge contacts of the handset
and base unit with a soft, dry cloth once
a month. Clean more often if the unit is
subject to grease, dust, or high humidity.
Battery strength
You can confirm the battery strength on the
handset display.
Recharging the battery
Recharge the battery when:
–“Recharge battery” is displayed or
7 flashes on the handset display.
– the handset beeps intermittently while it
is in use.
Note:
LRecharge the handset battery for more
than 15 minutes, or the display will
continue showing the indication.
LIf the battery has been discharged, the
handset will display “Charge for 6h
and 8 when you place the handset
on the base unit.
Battery icon Battery strength
5Fully charged
6Medium
7Low
When flashing: needs
to be recharged.
8Discharged

CHARGE indicator

TG2420(e).book Page 11 Thursday, December 16, 2004 11:11 AM