Panasonic KX-TG2420 Other options

Programmable Settings

34 For assistance, please call 1-800-211-PANA (7262).

Note:

LThe setting should stay at 700 ms unless

pressing {Flash} fails to pick up the Call

Waiting call.

LIf the unit is connected via a PBX, certain

PBX functions (call transferring, etc.)

may not work correctly. Consult your

PBX supplier for the correct setting.

Line mode

The line mode is preset to “B” and

generally should not be adjusted. If “Line

in use” on the handset is not displayed

properly, the line mode selection is

incorrect. Set line mode to “A”.

1Press {MENU}.

2Scroll to “Initial setting” by

pressing {V} or {^}, then press {>}.

3Scroll to “Set tel line” by pressing

{V} or {^}, then press {>}.

4Scroll to “Set line mode” by pressing

{V} or {^}, then press {>}.

5Press {V} or {^} repeatedly to select

the desired setting.

6Press {Save}, then press {OFF}.

Other options

Handset key tone

You can select whether or not key tones

are heard when keys are pressed.

Includes confirmation tones and error

tones. The default setting is ON.

1Press {MENU}.

2Scroll to “Initial setting” by

pressing {V} or {^}, then press {>}.

3Scroll to “Key tone” by pressing {V} or

{^}, then press {>}.

4Press {V} or {^} repeatedly to select

“On” or “Off”.

5Press {Save}, then press {OFF}.

Re-registering the handset

If “No link to base. Move closer

to base, try again.” is displayed

even when the handset is near the base

unit, you may need to re-register the

handset to the base unit.

Important:

LMake sure the base unit is not being

used.

LHave the handset and base unit near

each other when re-registering the

handset.

TG2420(e).book Page 34 Thursday, December 16, 2004 11:11 AM

Contents

Main Operating Instructions Table of Contents 2 Introduction Preparation Making/Answering Calls Phonebook Caller ID Service Page Page Accessory information 6 Important safety instructions SAVE THESE INSTRUCTIONS CAUTION: WARNING: 8 For best performance Connections Battery installation 1 2 Battery charge CHARGE indicator Battery replacement 1 2 Controls and displays Page Display Making calls 1 Flash Call 2 3 1 Answering calls 1 2 Useful features during a call 3=V.E. on g HOLD button 00-00-30 <Mute> 9P15556667777 Talk 00-00-20 For Call Waiting service users Temporary tone dialing (for rotary/pulse service users) Handset locator 1 2 Using the phonebook Adding items to the phonebook 1 2 3 4 5 Page Chain dial feature 1 2 3 4 Using Caller ID service 1-555-666-7777 Flash -Waiting- Caller list Viewing the caller list and calling back 2 3 10 missed calls Rcvd Phone 2 3 4 Storing caller information into the phonebook 2 3 4 321-5555 555-321-5555 1-555-321-5555 Page Voice Mail Service Using Voice Mail service PPPP 8888 Pauses Password Storing the Voice Mail (VM) access number 2 2 3 4 5 Listening to Voice Mail messages 2 3 4 Guide to handset programming Ringer settings Handset ringer volume Save dB Ringer setting Ringer volume Ringer volume Low High Ringer setting Ringer tone Ringer tone 1=Tone 1 Call options Display options Telephone settings Line mode 2 3 Other options Handset key tone 2 3 4 Page Programming via direct commands 2 3 4 5 Direct commands chart Page Wall mounting 1 2 Page Error messages Troubleshooting General use Making/answering calls, Paging Caller ID Battery charge Power failure Important information about subscription services FCC and other information CAUTION: NOTE: Technical information Base unit Handset FCC RF Exposure Warning: Warranty Limited Warranty Limits And Exclusions Customer services Customer Services Directory http://www.panasonic.com/consumersupport http://www.panasonic.com/contactinfo http://www.pasc.panasonic.com npcparts@us.panasonic.com Index IMPORTANT! Page Page If you need assistance with setup or operation; 1 2 3 When you ship the product;