Useful Information
36
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
*1KX-TG2511/KX-TG2521
*2KX-TG2521
Programmable settings
The unit does not work. LMake sure the batteries are installed correctly
(page 11).
LFully charge the batteries (page 11).
LCheck the connections (page 11).
LUnplug the base unit’s AC adaptor to reset the
unit and turn off the handset. Reconnect the
adaptor, turn on the handset and try again.
LThe handset has not been registered to the
base unit. Register the handset (page 40).
I cannot hear a dial tone. LMake sure that you are using the supplied
telephone line cord. Your old telephone line
cord may have a different wiring configuration.
LThe base unit’s AC adaptor or telephone line
cord is not connected. Check the connections.
LDisconnect the base unit from the telephone
line and connect the line to a known working
telephone. If the working telephone operates
properly, contact our service personnel to
have the unit repaired. If the working
telephone does not operate properly, contact
your service provider/telephone company.
I cannot use the intercom*1 or
phonebook copy*2 feature.
LThese features are shared between the
handsets. Although the handset displays
“Intercom”, “Copy All”, or “Copy”, these
features are not available for this model.
Problem Cause/solution
The display is in a language I
cannot read.
LChange the display language (page 14).
I cannot activate the eco mode. LYou cannot set eco mode when you set the
repeater mode “On”. If required, set the
repeater mode to “Off” (page 22).
Problem Cause/solution
TG251x_2xE(e).book Page 36 Monday, January 25, 2010 3:09 PM