Useful Information
37
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Battery recharge
Making/answering calls, intercom
I cannot remember the PIN. LChange the PIN using the following method.
1{j/OK}
2{V}/{^}: Base Unit Setup i
{j/OK}
3{V}/{^}: Base Unit PIN i
{j/OK}
4{*}{7}{0}{0}{0}
5Enter the new 4-digit base unit PIN. i
{j/OK} i {ic}
Problem Cause/solution
The handset beeps and/or
7 flashes.
LBattery charge is low. Fully charge the
batteries (page 11).
I fully charged the batteries, but
7 still flashes or
– the operating time seems to
be shorter.
LClean the battery ends (S, T) and the
charge contacts with a dry cloth and charge
again.
LIt is time to replace the batteries (page 11).
The handset display is blank. LThe handset is not turned on. Turn the power
on (page 14).
Problem Cause/solution
w is flashing. LThe handset is too far from the base unit.
Move closer.
LThe base unit’s AC adaptor is not properly
connected. Reconnect AC adaptor to the
base unit.
LThe handset is not registered to the base unit.
Register it (page 40).
LActivating one touch eco mode reduces the
range of the base unit in standby mode. If
required, turn eco mode off (page 15).
Problem Cause/solution
TG251x_2xE(e).book Page 37 Monday, January 25, 2010 3:09 PM