Panasonic KX-TG2583ALB, KX-TG2583ALS, KX-TG2583NZS operating instructions Selecting the Line Mode

Selecting the Line Mode

If the line is connected to a low voltage system such as a PBX, set to “B”. Otherwise the Call Waiting Caller ID Feature may not be used (p. 54). Your phone comes from the factory set to “A”.

Use the handset near the base unit.

Make sure the unit is in the standby mode initially.

Preparation

1	Press (FUNCTION/EXIT/CH).
2	Press (Å) or (Ä) repeatedly until the arrow
	points to “Program”.
3	Press FWD/EDIT (É) (Yes key).
4	Press (Å) or (Ä) repeatedly until the arrow
	points to “Set line mode”.
5	Press FWD/EDIT (É) (Yes key).
6	Press (Å) or (Ä) to select “B” or “A”.
7	Press FWD/EDIT (É) (Save key).
	•A beep sounds.

•To return to the standby mode, press (FUNCTION/EXIT/CH).

HSave directory Ringer volume

GF H=Yes

HProgram

GF H=Yes

HSave DIRECT#

Set recall time

GF H=Yes

HSet line mode Talk switching

GF H=Yes

Line mode

:A

GF H=Save

Line mode

:B

GF H=Save

Line mode

:B

•You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).

•If the handset has lost communication with the base unit, 3 beeps sound and “No link to base. Place on cradle and try again.” is displayed.

13