Panasonic KX-TG2583ALB, KX-TG2583ALS, KX-TG2583NZS Digits long, the number will not be

ProblemRemedy

The unit does not display the caller’s name and/or phone number.

•You need to subscribe to a Caller ID service from a telephone company.

•Other telephone equipment may be interfering with your phone. Disconnect it and try again.

•Other electrical appliances connected to the same outlet may be interfering with the Caller ID information.

•Telephone line noise may be affecting the Caller ID information.

The handset or base unit	•Do not pause for over 60 seconds while
display goes to the standby	searching.
mode while viewing the
Caller List.
When a second call is	•The line mode selection is incorrect. See
received during a	page 13.
conversation, the unit does
not display the new caller’s
name and/or phone number.
You cannot page the	•The handset is too far from the base unit.
handset or the base unit.	•The handset or the base unit is engaged
	in an outside call, viewing the Caller
	List/directory list or listening to
	messages. Try again later. If you are
	using the base unit, wait until “Handset
	in use” disappears.
You cannot redial by	•If the last number dialled was more than
pressing (REDIAL/PAUSE).	32 digits long, the number will not be

redialled correctly.

•The button has a double function as either redial or pause. It will redial the last number dialled if pressed at the outset of a call (p. 24, 27). If another number has been dialled first, it will operate as a pause button (p. 53).

Useful Information

75