Panasonic KX-TG2583ALB, KX-TG2583ALS, KX-TG2583NZS Selecting the Number of Rings, Toll saver

Selecting the Number of Rings

You can select the number of times the unit rings before the answering system answers a call, from “2” to “7” or “Toll saver”*.

Your phone comes from the factory set to “Toll saver”*.

Preparation

1	Press (FUNCTION/EXIT/CH).
2	Press (Å) or (Ä) repeatedly until the arrow
	points to “Program”.
3	Press FWD/EDIT (É) (Yes key).

HSave directory Ringer volume

GF H=Yes

HProgram

GF H=Yes

HSave DIRECT#

Set recall time

GF H=Yes

4	Press (Å) or (Ä) repeatedly until the arrow
		HTAD program
	points to “TAD program”.
		GF	H=Yes

5

6

Press FWD/EDIT (É) (Yes key).

•The base unit display shows programming options.

Press (2).

•The current setting is displayed on the base unit.

Answering system setting. See base unit.

Base unit display

Number of rings :Toll saver

7	Press (0), or (2) to (7) to set the number of rings.
	0:	Selects “Toll saver”*.
	2–7:	The unit will answer after the selected number of rings.
8	Press FWD/EDIT (É) (Save key).
	•A beep sounds.

•To return to the standby mode, press (FUNCTION/EXIT/CH).

*Toll saver

When you call the unit from a touch tone telephone:

If the unit answers on the 2nd ring, there is at least one new message. If the unit answers on the 4th ring, there are no new messages. Hang up when you hear the 3rd ring. This will save you the toll charge for the call.

23