Preparation
12
Battery installation/replacement
1Press the notch of the handset cover
firmly, and slide it in the direction of the
arrow.
LIf necessary, remove the old battery.
2Insert the battery (A), and press it
down until it snaps into position (B).
Then close the handset cover.
Important:
LUse only the rechargeable Panasonic
battery noted on page 5.
Battery charge
Place the handset on the base unit or
charger for 6 hours before initial use.
While charging, “Charging” is displayed
and the CHARGE indicator on the base
unit lights. When the battery is fully
charged, “Charge completed” is
displayed.
Base unit:
LModel shown is KX-TG2631.
Charger:
Note:
LIf you want to use the unit immediately,
charge the battery for at least 15
minutes.
LTo ensure that the battery charges
properly, clean the charge contacts of
the handset, base unit, and charger with
a soft, dry cloth once a month. Clean
more often if the unit is subject to the
B
A
Available model(s):
KX-TG2632
Charge contacts
TG2631NZ_2632NZ.book Page 12 Monday, March 13, 2006 9:25 AM