|
| Programming | |
|
|
|
|
Feature | Feature | Setting code | System |
| code |
| setting |
Ringer volume (Handset) | {1}{1} | {1}: Low {2}: Medium | – |
|
| {3}: <High> {0}: Off |
|
Set area code | {0}{4} | (page 26) | – |
Set dial mode | {0}{5}{1} | (page 47) | r |
Set line mode*5 | {0}{5}{3} | {1}: A {2}: <B> | r |
Set recall time*6 | {0}{5}{2} | {1}: 700ms {2}: <600ms> | r |
|
| {3}: 400ms {4}: 300ms |
|
|
| {5}: 250ms {6}: 110ms |
|
|
| {7}: 100ms {8}: 90ms |
|
Time adjustment*7 | {0}{9} | {1}: <Caller ID[auto]> | r |
(Caller ID subscribers only) |
| {0}: Manual |
|
Voice enhancer | {5} | {1}: On {0}: <Off> | – |
*1 If you subscribe to Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this feature.
*2
*3 This tone lets you know when you receive a call while you are on an intercom call. If you select “On”, the tone sounds repeatedly for as long as the line rings. If you select “2”, the tone only sounds 2 times.
*4 You can select whether or not key tones are heard when keys are pressed. Includes confirmation tones and error tones.
*5 Generally, the line mode setting should not be adjusted. If “Line in use” is not displayed when another phone connected to the same line is in use, you need to change the line mode to “A”.
*6 The recall time depends on your telephone exchange or host PBX. Consult your PBX supplier if necessary.
The setting should stay at 600 ms unless pressing {Recall} fails to pick up the Call Waiting call.
*7 If the caller ID time and date display service is available in your area, this feature allows the unit to automatically adjust the date and time setting when caller information is received. To use this feature, set the date and time first.
31