Answering System
37
For Telecom Call Minder or TelstraClear
Message Mailbox service subscribers
To receive Call Minder or Message
Mailbox messages and use the unit's
answering system properly, please note
the following:
L“Call Minder” and “Message Mailbox”
are services provided by your Service
Provider. You will need to first subscribe
or activate this service through your
Service Provider. Consult your Service
Provider on how to operate this service
and how you will be notified that you
have messages.
To use this service you will be required
to leave your answering machine off on
your unit. This will allow the service to
receive any messages.
This unit does not have a visual indicator
to indicate if there are new messages.
Your Service Provider uses a “Stutter”
dial tone (special dial tone) to indicate
that you have new messages.
LTo use the unit’s answering machine
rather than the service provided by your
Service Provider, please consult your
Service Provider to have it removed or
deactivated permanently or temporarily.
Alternatively you can leave this service
connected and change the “Ring count”
to a shorter duration on your unit so your
unit's answering machine can pick up
the call prior to the service provided by
your Service Provider.
Note:
LThis service can capture messages
while the user is on a dial-up Internet
connection.

Caller’s recording time

You can change the maximum message
recording time allotted to each caller.
The default setting is “3min”.
“Greeting only”: The unit plays the
greeting message but does not record
caller messages.
1{MENU} i {0}{6}{2}
2Select the desired setting. i {Save}
i {OFF}
Note:
LIf the message memory becomes full,
the unit automatically switches to the
“Greeting only” mode and no new
messages are recorded. If you have
recorded your own greeting message,
that same greeting message is
announced to callers even though their
messages are not recorded. If you have
not recorded your own greeting
message, the prerecorded message
used for “Greeting only” mode is
announced to callers (page 33).

Message alert

You can select whether or not the
message indicator on the handset flashes
when new messages are recorded (page
34). The default setting is “Off”.
1{MENU} i {0}{#}
2Select the desired setting. i {Save}
i {OFF}
Note:
LWhile message alert is on, battery
operating time is shortened (page 13).
TG2631NZ_2632NZ.book Page 37 Monday, March 13, 2006 9:25 AM