Programming
RDo not use more than one repeater at a time.
Setting the repeater mode
1M
N
2MbN: “Base Unit Setup” a M
N
3 MbN: “Repeater Mode” a M
N
4MbN: Select the desired setting. a
M
N a M
N
Note:
RAfter turning the repeater mode on or off, 
may flash on the handset momentarily. This is normal and the handset can be used
once 
stops flashing.
Registering the DECT repeater (KX-A405) to the base unit
Note:
RPlease use a repeater that has not yet been registered to another unit. If the repeater is registered to another unit, deregister it first, referring to the Installation Guide for the DECT repeater.
1Base unit:
Press and hold M
N for about 5 seconds. (No registration tone)
R The next step must be completed within 90 seconds.
2DECT repeater:
Connect the AC adaptor, then wait until
the 
indicator and 
indicator light green.
3Base unit:
To exit the registration mode, press M
N.
21
2012/09/19 15:02:00
