Useful Information
Registering a handset to the base unit
1Handset:
M
N
2MbN: “Handset Setup” a M
N
3 MbN: “Register H.set” a M
N
4Base unit:
Press and hold M
N for about 5 seconds. (No registration tone)
R If all registered handsets start ringing, press M
N again to stop, then repeat this step.
R The next step must be completed within 90 seconds.
5Handset:
Wait until “Enter Base PIN” is displayed. a Enter the base unit PIN (default: “0000”).
a M
N
R If you forget your PIN, contact an authorised service centre.
R When the handset has been registered successfully, 
stops flashing.
Deregistering a handset
1M
N
2MbN: “Base Unit Setup” a M
N
3335 a M
N
R All handsets registered to the base unit are displayed.
4Enter the desired handset number you want to cancel. a M
N
5MbN: “Yes” a M
N
R A confirmation tone sounds.
R The handset does not beep when cancelling its own registration.
6M
N
Changing the base unit PIN (Personal Identification Number)
Important:
RIf you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to you. If you forget your PIN, contact an authorised service centre.
1M
N
2MbN: “Base Unit Setup” a M
N
3 MbN: “Base Unit PIN” a M
N
4 Enter the current
5 Enter the new 
N a M
N
31
2012/09/19 15:02:01
