TG37xx38xxBX(e).book Page 53 Wednesday, June 8, 2011 2:08 PM
| Useful Information | |
|
|
|
Problem | Cause/solution |
|
I cannot operate the | L The remote access code is not set. Set the remote access |
|
answering system | code (page 40). |
|
remotely. | L You are entering the wrong remote access code. If you have |
|
| forgotten your remote access code, enter the remote access |
|
| code setting to check your current code (page 40). |
|
| L Press each key firmly. |
|
| L The answering system is turned off. Turn it on (page 40). |
|
|
|
|
Dial lock |
|
|
Important: |
|
|
LAnyone can turn off the dial lock using the following method. Be sure to keep these operating instructions in a safe place in order to prevent unauthorized persons from using your phone without permission.
Problem | Cause/solution |
|
I cannot remember the | L Turn the dial lock off using the following method. |
|
dial lock password. | YHandset / _Base unit*1 |
|
| *1 |
|
| 1 Proceed with the operation for your unit. |
|
| Handset: {MENU}y251 |
|
| Base unit: {DIAL LOCK} |
|
| 2 Press *7zzz. |
|
| 3 Proceed with the operation for your unit. |
|
| Handset: {OK} 2 times s{OFF} |
|
| Base unit: {4} 2 times |
|
|
|
|
Liquid damage |
|
|
|
|
|
Problem | Cause/solution |
|
Liquid or other form of | L Disconnect the AC adaptor and telephone line cord from the |
|
moisture has entered the | base unit. Remove the batteries from the handset and leave |
|
handset/base unit. | to dry for at least 3 days. After the handset/base unit are |
|
| completely dry, reconnect the AC adaptor and telephone line |
|
| cord. Insert the batteries and charge fully before use. If the |
|
| unit does not work properly, contact an authorized service |
|
| center. |
|
Caution:
LTo avoid permanent damage, do not use a microwave oven to speed up the drying process.
53