Base Unit Speed Dialer
Base unit speed dialer
You can assign one phone number to each of the 10 dial keys ({0} – {9}) on the base unit.
Adding phone numbers to the speed dialer
Important:
LBefore storing phone numbers, make sure the base unit is not being used.
1
2 Enter the phone number (max. 32 digits).
LIf a pause is required for dialing, press {PAUSE} where needed.
LIf you misdial, press {STOP} and repeat from step 1.
3 {PROGRAM}
4 Press a dial key ({0} – {9}).
Note:
LIf a phone number is stored in a dial key which already contains a phone number, the old number will be erased.
LWe recommend you make a note of which phone numbers are stored in which dial keys.
PAUSE button (for PBX/long distance service users)
A pause is sometimes required when making calls using a PBX or long distance service.
For example, if you need to dial the line access number “9” when making outside calls with a PBX:
In step 2, press {9}, {PAUSE}, then enter the phone number.
Note:
LA 3.5 second pause is inserted each time {PAUSE} is pressed. Press repeatedly to insert longer pauses. “P” is displayed when {PAUSE} is pressed.
LWhen {*} is pressed, “$” is displayed. When {#} is pressed, “#” is displayed.
To erase a stored phone number
1 Press {PROGRAM} 2 times.
2 Press the desired dial key ({0} – {9}).
Calling someone with the speed dialer
1 {SP-PHONE} i{AUTO}
2 Press the desired dial key ({0} – {9}).
Note:
LSpeed dial numbers stored in the base unit can only be dialed from the base unit.
For assistance, please visit http://www.panasonic.com/phonehelp | 27 |
