Programming
Main menu |
| Page | |
Initial setting | Set answering | Ring count*1 | page 41 |
|
| Recording time*1 | page 42 |
|
| Remote code*1 | page 41 |
| Message alert | – | page 42 |
| LCD contrast | – | – |
| Key tone | – | – |
| Auto talk | – | page 20 |
| Caller ID edit | – | – |
| Time adjustment*1 | – | – |
| Set tel line | Set dial mode*1 | page 18 |
|
| Set flash time*1 | – |
|
| Set line mode*1 | – |
| Set base unit | Talking CallerID*1 | – |
| Registration | – | page 46 |
| Change language | – | page 18 |
*1 If you program these settings using one of the handsets, you do not need to program the same item using another handset
*2
Programming using the direct commands
1
2
3
4
{MENU}
Enter the desired feature code.
Enter the desired setting code.
LThis step may vary depending on the feature being programmed.
{Save} i{OFF}
Note:
LIn the following table:
–< > shows the default setting.
–If “System setting” column is checked, you do not need to program the same item using another handset (KX-
LIf you make a mistake or enter the wrong code, press {OFF}, then start again by pressing {MENU}.
For assistance, please visit http://www.panasonic.com/phonehelp | 33 |
