Caller ID Service

21
Using Caller ID service
This unit is Caller ID compatible. To use
Caller ID features (such as displaying
caller phone numbers), you must
subscribe to Caller ID service. Consult
your service provider/telephone
company for details.
Caller ID features
When an outside call is being received,
the calling party’s telephone number is
displayed.
Telephone numbers for the last 50
callers are logged in the caller list by the
most recent call to the oldest.
LIf the unit cannot receive caller
information, the following is
displayed:
–“Out of area”: The caller dialled
from an area which does not
provide Caller ID service.
–“Private caller”: The caller
requested not to send caller
information.
LIf the unit is connected to a PBX
system, caller information may not be
received properly. Consult your PBX
supplier.
LIf the name display service is
available in your area, the display
shows caller names. For further
information, please contact your
service provider/telephone company.
Missed calls
If a call is not answered, the unit treats
the call as a missed call. You can view
the number of missed calls by pressing
{View CID}.
Phonebook name display
When the Caller ID number is received
and it matches a phone number stored
in the phonebook, the stored name from
the phonebook is displayed and logged
in the caller list.

Call waiting and Caller ID

compatible

If you subscribe to Caller ID service,
your handset displays the 2nd caller’s
information while talking. After you hear
a call waiting tone, the caller’s phone
number will be displayed.
You can answer the 2nd call, keeping
the 1st call on hold.
Follow your service provider/telephone
company instructions using {RECALL}.
LIf the phone number is stored in the
phonebook with its name, the caller’s
name will also be displayed.
LPlease contact your service provider/
telephone company for details and
availability in your area.
For Caller ID Type II users
When you receive a 2nd call during a
conversation, you will hear a signal tone
following the call waiting tone and the
conversation will be interrupted or
muted for a short period of time. This
is not a fault of the product as these
events are normal.
LThe tones are generated by your
service provider/telephone company.

Talking Caller ID

This feature lets you know who is calling
without looking at the display. To use
this feature, you must subscribe to
Caller ID service from your service
provider/telephone company and turn
this feature on (page 28). When a caller
information is received, the all supplied
handset(s) and base unit announce:
– the caller’s phone number following
every ring.
TG605xAL.book Page 21 Thursday, September 27, 2007 5:49 PM