Caller ID Service

the caller’s customized name following every ring, if the caller information matches a phone number stored in the handset 1 phonebook. If the handset 1 does not have a link to the base unit

(battery is empty, for instance), the other handset(s)*1 and the base unit announce the caller’s phone number.

*1 KX-TG6052/KX-TG6053

LUsually the unit announces the caller’s information after the 2nd ring. Depending on your telephone service provider, the unit may announce the caller’s information later than usual.

LName pronunciation may vary. This feature may not pronounce all names correctly.

LUsually the unit announces the caller’s information after the 2nd ring. If you turn on the answering system and set the ring count to “2” (page 34), the unit does not announce the caller’s information. If “Toll saver” is selected and there is a new message, the unit does not announce the caller’s information.

LYour unit may mute one or more rings in order to announce the caller’s information. Talking Caller ID takes precedence over ringing.

LThe announcement is heard at the ringer volume (page 15 , 28).

LThis feature can be turned on or off (page 28).

LFor users in name display service available areas:

The unit announces the Caller ID name provided by your telephone service provider.

The unit announces the customized phonebook entry name for numbers stored in the handset 1 phonebook.

Caller ID service has a limit of how many characters can be displayed. If a caller’s name is too long, the handset may not be able to display or announce the entire name.

Ringer ID/Light-up ID

This feature can help you identify who is calling by using different ringers and ringer indicator colours for different callers stored in the phonebook. You can assign a different ringer and indicator colour to each phonebook item. When a call is received from a caller stored in the phonebook, the assigned ringer rings and the assigned ringer indicator colour flashes after Caller ID information is displayed.

If you select “No Ringer ID” (default) or “No Light-up ID” (default), the handset uses the ringer tone or ringer indicator colour you selected on page 27 when a call is received from that caller.

LThe ringer and indicator colour may be changed after the 2nd ring.

1Find the desired item (page 19). i

{Option}

2To assign a ringer:

{V}/{^}: Select “Ringer ID”. i

{Select}

To assign a ringer indicator colour: {V}/{^}: Select Light-up ID”. i

{Select}

3{V}/{^}: Select the desired setting.

4{Save} i{OFF}

22

Page 22
Image 22
Panasonic KX-TG6051AL, KX-TG6053AL, KX-TG6052AL operating instructions Ringer ID/Light-up ID, Select