Panasonic KX-TG6543 Changing the handset name, Call block Caller ID subscribers only, Add, Clear

TG6511(e).book Page 30 Thursday, January 21, 2010 1:11 PM

Programming

Changing the start and end time

1{MENU} i{#}{2}{3}{7}

2Continue from step 3, “Turning silent mode on/off”, page 29.

Changing the handset name

Each handset can be given a customized name (“Bob”, “Kitchen”, etc.). This is useful when you make intercom calls between handsets. You can also select whether or not the handset name is displayed in standby mode. The default setting is “Off”. If you select “On” without entering any handset name, “Handset 1” to “Handset 6” is displayed.

1{MENU} i{#}{1}{0}{4}

2Enter the desired name (max. 10 characters; see the character table, page 20).

L If not required, go to step 3.

3{SAVE}

4{V}/{^}: Select the desired setting. i{SELECT}

5{SELECT} i{OFF}

Call block (Caller ID subscribers only)

This feature allows the unit to reject calls when:

–the unit receives a call from a phone number stored in the call block list as unwanted (“Storing unwanted callers”, page 30).

–the unit receives a call without phone number (“Block calls without phone number”, page 31).

When a call is received, the unit rings for a short time while the caller is being identified. If the phone number matches an entry in the call block list, the unit

sends out a busy tone to the caller, and then disconnects the call.

Important:

L When the unit receives a call from a number that is stored in the call block list or a call without a recognized phone number, the call is logged in the caller list (page 34) with $after the call is disconnected.

Storing unwanted callers

You can store up to 30 phone numbers in the call block list by using the caller list or by entering the numbers directly.

Important:

L We recommend storing 10 digits (including an area code). If only 7 digits are stored, all numbers that have the same last 7 digits will be blocked.

■From the caller list: 1 {<} CID

2{V}/{^}: Select the entry to be blocked.

L To edit the number, press {EDIT} repeatedly until the phone number is shown in the 10-digit format.

3{SAVE}

4{V}/{^}: “Call block” i

{SELECT}

5{V}/{^}: “Yes” i{SELECT}

6Edit the phone number if necessary (24 digits max.).

7{SAVE} i{OFF}

■By entering phone numbers:

1{MENU} i{#}{2}{1}{7} i

{ADD}

2Enter the phone number (24 digits max.).

L To erase a digit, press

{CLEAR}.

3{SAVE} i{OFF}

30For assistance, please visit http://www.panasonic.com/help