Answering calls

TG6511(e).book Page 17 Thursday, January 21, 2010 1:11 PM

L While on a call, you can switch from the base unit to the handset:

–Press {C} on the handset, then press {SP-PHONE} on the base unit with the privacy mode off (page 19).

–If the handset is on the base unit, simply lift it.

Adjusting the speaker volume

Press {^} or {V} repeatedly while talking.

Redialing the last number dialed {SP-PHONE}i{REDIAL}

When a call is being received, the ringer indicator flashes rapidly.

1Lift the handset and press {C} or {s} when the unit rings.

L You can also answer the call by pressing any dial key from {0} to

{9}, {*}, or {#}. (Any key answer feature)

2When you finish talking, press

{OFF} or place the handset on the base unit or charger.

You can answer calls simply by lifting the handset off the base unit or charger. You do not need to press {C}. To turn this feature on, see page 26.

Adjusting the handset ringer volume Press {^} or {V} repeatedly to select the desired volume while the handset is ringing for an incoming call.

Note:

L You can also program the handset ringer volume beforehand (page 25).

While the handset is ringing for a call, you can turn the ringer off temporarily by pressing {~}.

Adjusting the base unit ringer volume

Press {^} or {V} repeatedly to select the desired volume.

L To turn the ringer off, press and hold {V} until the unit beeps.

Note:

L Even when the ringer volume is set to off, the base unit still rings for intercom calls (page 45). (KX-TG6541 series: page 3)

Available for:

KX-TG6541 series (page 3)

When a call is being received, the SP- PHONE indicator flashes rapidly.

1Press {SP-PHONE} when the unit rings.

2Speak into the microphone.

3When you finish talking, press {SP- PHONE}.

			For assistance, please visit http://www.panasonic.com/help				17