Panasonic KX-TG7434 Programmable settings, Programming by scrolling through the display menus

Programming

Programmable settings

You can customize the unit by programming the following features using the handset. To access the features, there are 2 methods:

–scrolling through the display menus (page 18)

–using the direct commands (page 20)

L Direct command is the main method used in these operating instructions.

Programming by scrolling through the display menus

1{MENU} (center of joystick)

2Select the desired top-menu by pushing the joystick in any direction. i

{SELECT}

3Push the joystick down or up to select the desired item in sub-menu 1. i

{SELECT}

L In some cases, you may need to select from sub-menu 2. i{SELECT}

4Push the joystick down or up to select the desired setting. i{SAVE} L This step may vary depending on the feature being programmed.

L To exit the operation, press {OFF}.

Note:

L See page 20 for the default settings.

Main menu	Sub-menu 1	Sub-menu 2	Page
Caller list	–	–	28
W
Answering device	Message list	–	32
s	Play new msg.	–	32
	Play all msg.	–	32
	Erase all msg.*1	–	33
	Greeting	Record greeting*1	31
		Check greeting	31
		Pre-recorded*1	31
	Settings	Ring count*1	34
		Recording time*1	35
		Remote code*1	33
	Answer on*1	–	30
	Answer off*1	–	30
V.M. access	–	–	37
#

18For assistance, please visit http://www.panasonic.com/help