Panasonic KX-TG7434 Registering a unit, Operating additional units, Additional handsets

Programming

Registering a unit

Operating additional units

Additional handsets

Up to 6 handsets can be registered to the base unit.

Important:

L See page 4 for information on the available model.

Registering a handset to a base unit

The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, re-register the handset.

1Handset:

{MENU} (center of joystick) i

{#}{1}{3}{0}

2Base unit:

Press and hold {LOCATOR} for about 4 seconds until the registration tone sounds.

L If all registered handsets start ringing, press the same button to stop. Then repeat this step.

L The next step must be completed within 90 seconds.

3Handset:

Press {OK}, then wait until a long beep sounds.

4{OFF}

Note:

L While registering, “Base regtr’ing” (Base registering) is displayed on all registered handsets.

L When you purchase an additional handset, refer to the additional handset’s installation manual for registration.

Deregistering a handset

A handset can cancel its own registration (or the registration of another handset) that is stored to the base unit. This allows the handset to end its wireless connection with the system.

1{MENU} (center of joystick) i

{#}{1}{3}{1}

2{3}{3}{5} i{OK}

3Select the handset you want to cancel by pressing the desired handset number.

4{V}/{^}: “Yes” i{SELECT}

26For assistance, please visit http://www.panasonic.com/help