Getting Started
Display
Handset display items
Item | Meaning |
w | Within range of a base unit |
_ | Out of range of a base unit |
S | The line is in use. |
| L When flashing: |
| – The call is put on |
| hold. |
| – The answering |
| system is answering |
| a call. |
| L When flashing rapidly: |
| An incoming call is now |
| being received. |
s | Speaker is on. (page 13) |
~ | Ringer volume is off. |
| (page 21) |
& | Silent mode is on. (page |
| 23) |
( | Clarity booster is on. |
| (page 15) |
E | Alarm is on. (page 23) |
m | Handset number |
& | Battery level |
$ | Blocked call (page 24) |
Temporary switch of the display mode
Available for: KX-TGA740 handset
You can select to display either a single item or multiple items on one screen at a time for the following features:
–menu list, phonebook list, caller list, redial list, message list, and call block list
–handset top menu icons in function menu
The following icons are shown when you press down on the center of the joystick in standby mode.
Icon | Feature |
W | Caller list |
s | Answering device |
# | V.M. access |
x | Intercom |
" | Initial setting |
! | Customer support |
You can temporarily switch the display mode as follows by pressing the right soft key shown when viewing the lists or selecting menu icons:
–{MULTI}: Multiple entries/all menu icons are shown on one screen at a time.
–{SINGLE}: An entry/a menu icon is shown on one screen in large characters at a time.
Note:
L You can set the unit to always show a single item or multiple items beforehand by selecting “Single item” or “Multi items” as the display mode setting (page 25).
LWhen “Multi items” is selected as the display mode, you can switch the screen to confirm the detailed information by pressing {SINGLE}.
For assistance, please visit http://www.panasonic.com/help | 11 |
