Answering System
Calling back (Caller ID subscribers only)
If caller information is received for the call, you can call the caller back while listening to a message.
1Press {SELECT} during playback. L To edit the number before calling back, press {EDIT} repeatedly until the phone number is shown
in the desired format (page 28).
2{C}
Erasing all messages
1{MENU} (center of joystick) i
{#}{3}{2}{5}
2{V}/{^}: “Yes” i{SELECT} i
{OFF}
Remote operation
Using a
Remote access code
A
1{MENU} (center of joystick) i
{#}{3}{0}{6}
2Enter the desired
{OFF}
Using the answering system remotely
1Dial your phone number from a
2After the greeting message starts, enter your remote access code. L The unit plays back new
messages.
L The voice guidance announcements are different depending on the voice guidance language setting (page 12).
3Follow the voice guidance prompts as necessary or control the unit using remote commands (page 34).
4When finished, hang up.
Note:
L You can also leave a message just as any outside caller can. After the greeting message starts, press {*} to skip the greeting message and record your message after the beep.
Voice guidance
When the English voice guidance is selected
During remote operation, the unit’s voice guidance starts and prompts you to press {1} to perform a specific operation, or press {2} to listen to more available operations. Operations are presented by voice guidance in the following order:
–Play back all messages
–Play back new messages
–Record your message
–Erase all messages
Note:
LIf you do not press any dial keys within 10 seconds after a voice guidance prompt, the unit disconnects your call.
For assistance, please visit http://www.panasonic.com/help | 33 |