Useful Information
Troubleshooting
If you still have difficulties after following the instructions in this section, disconnect the base unit’s AC adaptor, then reconnect the base unit’s AC adaptor. Remove the batteries from the handset, and then insert the batteries into the handset again.
General use
Problem | Cause/solution |
|
The unit does not work. | L Make sure the batteries are installed correctly |
|
| (page 8). |
|
| L Fully charge the batteries (page 8). |
|
| L Check the connections (page 8). |
|
| L Unplug the base unit’s AC adaptor to reset the |
|
| unit. Reconnect the adaptor and try again. |
|
| L The handset has not been registered to the base | |
| unit. Register the handset (page 26). |
|
I cannot hear a dial tone. | L The base unit’s AC adaptor or telephone line cord | |
| is not connected. Check the connections. |
|
| L If you are using a splitter to connect the unit, |
|
| remove the splitter and connect the unit to the wall | |
| jack directly. If the unit operates properly, check |
|
| the splitter. |
|
| L Disconnect the base unit from the telephone line | |
| and connect the line to a known working |
|
| telephone. If the working telephone operates |
|
| properly, contact our service personnel to have the | |
| unit repaired. If the working telephone does not |
|
| operate properly, contact your service provider/ |
|
| telephone company. |
|
The indicator on the | L New messages have been recorded. Listen to the | |
handset flashes slowly. | new messages (page 32). |
|
| L New voice mail messages have been recorded. |
|
| Listen to the new voice mail messages (page 37). | |
|
|
|
Programmable settings |
|
|
|
|
|
Problem | Cause/solution |
|
I have changed the display | L Change the display language (page 12). |
|
language to a language I |
|
|
cannot read. |
|
|
While programming, the | L A call is being received. Answer the call and start | |
handset starts to ring. | again after hanging up. |
|
|
|
|
For assistance, please visit http://www.panasonic.com/help | 41 | |
