Programming |
|
|
|
| |
| Settings | Code |
| ||
First Ring*1, *5 | – | 1: <On> | #173 | – | |
|
|
| 0: Off |
|
|
Main menu: | “Caller Barred”*1 |
|
|
| |
Operation |
|
|
| Code |
|
Storing/Viewing bar call numbers. |
| #217 | 26 | ||
*1 If you program these settings using one of the handsets, you do not need to program the same item using another handset.
*2 This feature allows the unit to automatically adjust the date and time each time caller information including date and time is received.
To turn this feature on, select “Caller ID”. To turn this feature off, select “Manual”. (Caller ID subscribers only)
To use this feature, set the date and time first (page 13).
*3 The ringer tone may continue to play for several seconds even if the caller has already hung up. You may either hear a dial tone or no one on the line when you answer the call.
*4 The preset melodies in this product (“Ringtone 3” - “Ringtone 20”) are used with permission of © 2012 Copyrights Vision Inc.
*5 If you do not want the unit to ring before the caller information is received, set to “Off”. (Caller ID subscribers only)
You can only remove the first ring if the unit rings 2 times or more by default, which depends on your service provider/telephone company.
*6 You can set the handset display backlight while on charge.
–“On”: Backlight is on (dimmed).
–“Off”: Backlight turns off after 10 seconds of charging.
*7 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any keys, including confirmation tones and error tones.
*8 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this feature.
*9 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if necessary.
*10 To prevent other users from joining your conversations with outside callers, turn this feature on.
*11 This menu is not displayed when scrolling through the display menus. It is only available in direct command code.
Special programming
Alarm
An alarm sounds at the set time for 1 minute and is repeated 5 times at 5 minute intervals (snooze function). A text memo can also be displayed for the alarm. A total of 3 separate alarm times can be programmed for each
handset. You can set one of 3 different alarm options (once, daily, or weekly) for each alarm time.
Important:
RSet the date and time beforehand (page 13).
1M
N (right soft key) #720
2Select an alarm by pressing 1 to 3. a
MOKN
24
2013/07/18 12:00:00
