Programming
Programmable settings
You can customise the unit by programming the following features using the handset. To access the features, there are 2 methods.
nScrolling through the display menus 1 MN (right soft key)
2 Press MCN, MDN, MEN, or MFN to select the desired main menu. a MOKN
3 Press MCN or MDN to select the desired item from the next
4 Press MCN or MDN to select the desired setting. a MOKN
R This step may vary depending on the feature being programmed. R To exit the operation, press MeN.
nUsing the direct command code
1 MN (right soft key) a Enter the desired code. Example: Press MN (right soft key) #101.
2Select the desired setting. a MOKN
R This step may vary depending on the feature being programmed. R To exit the operation, press MeN.
Note:
RIn the following table, < > indicates the default settings.
RIn the following table, indicates the reference page number.
RDisplay menu order and
Display the menu tree and direct command code table
Main menu: “Time Settings”
Settings | Code |
| ||
Set Date/Time*1 | – | – | #101 | 13 |
Memo Alarm | 1: Once | #720 | 24 | |
|
| 2: Daily |
|
|
|
| 3: Weekly |
|
|
|
| 0: <Off> |
|
|
Time Adjustment*1, *2 | – | 1: Caller ID | #226 | – |
|
| 0: <Manual> |
|
|
Main menu: “Caller List”
Operation | Code |
|
Viewing the caller list. | #213 | 29 |
Main menu: “Intercom”
Operation | Code |
|
Paging the desired unit. | #274 | 32 |
|
| 21 |
2013/07/18 12:00:00