Programming
29
For assistance, please visit http://www.panasonic.com/help
Registering a unit

Operating additional units

Additional handsets
Up to 6 handsets can be registered to
the base unit.
Important:
LSee page 4 for information on the
available model.

Registering a handset to the

base unit

The supplied handset and base unit are
pre-registered. If for some reason the
handset is not registered to the base
unit, re-register the handset.
1Handset:
{MENU} i {#}{1}{3}{0}
2Base unit:
Press and hold {LOCATOR} for
about 5 seconds until the indicators
for VOICE MAIL turn on. (No
registration tone)
LIf all registered handsets start
ringing, press the same button to
stop. Then repeat this step.
LThe next step must be completed
within 90 seconds.
3Handset:
Press {OK}, then wait until a long
beep sounds.
Note:
LWhen you purchase an additional
handset, refer to the additional
handset’s installation manual for
registration.
Deregistering a handset
A handset can cancel its own
registration (or the registration of
another handset) that is stored to the
base unit. This allows the handset to end
its wireless connection with the system.
1{MENU} i {#}{1}{3}{1}
2{3}{3}{5} i {OK}
3Select the handset(s) you want to
cancel by pressing the desired
handset number.
LThe selected handset number(s)
flashes.
LTo cancel a selected handset
number, press the number again.
The number stops flashing.
4{OK} i {V}/{^}: Yes i
{SELECT}
LWhen you cancel a different
handset than the one you are now
using, press {OFF} to exit.
TG9321(e).book Page 29 Friday, May 28, 2010 4:34 PM