Voice Mail Service
Voice mail service
Voice mail is an automatic answering service offered by your service provider/telephone company. After you subscribe to this service, your service provider/telephone company’s voice mail system answers calls for you when you are unavailable to answer the phone or when your line is busy. Messages are recorded by your service provider/ telephone company, not your telephone. Please contact your service provider/ telephone company for details of this service.
Storing the voice mail (VM) access number
In order to listen to your voice mail messages, you must dial your service provider/telephone company’s voice mail access number. Once you have stored your voice mail access number, you can dial it automatically (page 34).
1{MENU} i{#}{3}{3}{1}
2{V}/{^}: Select the desired line. i
{SELECT}
3Enter your access number (24 digits max.). i{SAVE} i{OFF}
Note:
L When storing your voice mail access number and your mailbox password, press {PAUSE} to add pauses (page
15)between the access number and the password as necessary. Contact your service provider/telephone company for the required pause time.
Example:
VM access | Pauses Password |
number |
|
To erase the voice mail access number
1{MENU} i{#}{3}{3}{1}
2{V}/{^}: Select the desired line. i
{SELECT}
3Press and hold {CLEAR} until all digits are erased. i{SAVE} i
{OFF}
Voice mail (VM) tone detection
Your service provider/telephone company sends special signals (sometimes called “voice mail tones” or “stutter tones”) to the unit to let you know you have new voice mail messages. If you hear a series of dial tones followed by a continuous dial tone after you press {C}, you have new voice mail messages. Soon after you hang up a call or after the phone stops ringing, your unit checks the phone line to see if new voice mail messages have been recorded. Turn this feature off when:
–You do not subscribe to voice mail service.
–Your service provider/telephone company does not send voice mail tones.
–Your phone is connected to a PBX.
If you are not sure which setting is required, contact your service provider/telephone company.
Turning VM tone detection on/off The default setting is “On”.
1{MENU} i{#}{3}{3}{2}
2{V}/{^}: Select the desired setting. i{SAVE} i{OFF}
For assistance, please visit http://www.panasonic.com/help | 33 |
