Panasonic KX-TG9321T, KX-TG9322 operating instructions If you subscribe to a DSL/ADSL service

Getting Started

To connect to 2 single-line telephone jacks

“Click”

“Transparent” plug

“GREEN” plug

To single-line telephone jacks (RJ11C)

Line 1

2-wire cord

Line 2

4-wire cord

If you use the unit as a single-line telephone only

Be sure to connect the telephone line cord to LINE 1/2. Change the line selection mode from “Auto” to “Line1” (page 14).

“Click”

	“Transparent” plug
	To single-line
	telephone jack
2-wire cord	(RJ11C)

Note:

L “Check tel line 2” is displayed on the unit. To erase it, see page 39.

If you subscribe to a

DSL/ADSL service

Please attach a DSL/ADSL filter (contact your DSL/ADSL provider) to the telephone line between the base unit and the telephone line jack in the event of the following:

–noise is heard during conversations.

–Caller ID features do not function properly.

To connect to a 2-line telephone jack For this connection, please purchase a Panasonic 2-line splitter (page 4).

Example: DSL/ADSL line is line 2

“Click”

“Transparent” plug

“GREEN” plug

To 2-line telephone jack (RJ14C)

2-line splitter

“Click”

2-wire cord

4-wire cord

DSL/ADSL filter*

“Click”

*DSL/ADSL filter (not supplied) is required if you have DSL/ADSL service.

For assistance, please visit http://www.panasonic.com/help 9