Important Information/Safety Instructions
NOTICE:
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Privacy of communications may not be ensured when using this telephone.
Operating near 5.8 GHz electrical appliances may cause interference. Move away from the electrical appliances.
The term “IC:” before the radio certification number only signifies that Industry Canada radio technical specifications were met.
Take special care to follow the safety suggestions listed below.
Safety
1)The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the unit.
2)When left unused for a long period of time, the unit should be unplugged from the household AC outlet.
Installations
Environment
1)Do not use this unit near water — for example, near a bathtub, washbowl, sink, etc. Damp basements should also be avoided.
2)The unit should be kept away from heat sources such as radiators, kitchen ranges, etc. It also should not be placed in rooms where the temperature is less than 5°C (41°F) or greater than 40°C (104°F).
3)The AC adaptor is used as the main power source. Ensure that the AC outlet is located/ installed near the unit and is easily accessible.
Placement
1)Do not place heavy objects on top of this unit.
2)Care should be taken so that objects do not fall onto, and liquids are not spilled into, the unit. Do not subject this unit to excessive smoke, dust, mechanical vibration or shock.
3)Place the unit on a flat surface.
For best performance
1)If noise prevents the conversation from being understood on the handset, approach the base unit to lessen the noise.
2)The handset should be used at the HIGH volume setting when the reception is poor.
3)The handset should be fully recharged on the charger when “Recharge battery” is displayed and/or “3” flashes on the display.
4)The handset antenna should not be touched during use because of its high sensitivity.
5)The maximum calling distance may be shortened when the unit is used in the following places: Near obstacles such as hills, tunnels, underground, near metal objects such as wire fences, etc.
– 6 –
