Programmable Settings
32 For assistance, please visit http://www.panasonic.com/phonehelp

Recording songs from an audio

device for ringer tones using the

handset (“Customize ring”)

You can record songs (max. 30 seconds
each) from an audio device by connecting
the audio cable included with your base
unit. These songs can be assigned as the
handset ringer tone (page 31) and the
ringer ID (page 24) for phone numbers
stored in the handset phonebook.
Important:
LIf a call is received while a song is being
recorded or played back, recording or
playback stops automatically.
Disconnect the audio cable from the
handset to answer the call.
1Connect the audio device (such as a
CD player or computer) to the handset
using the audio cable included with your
base unit.
2{MENU} (center of joystick) i f
i {SELECT}
3Customize ringi {SELECT}
4Recordi {SELECT}
5Start playing the audio device.
6Press {REC.} to start recording.
7To stop recording, press {STOP}.
LTo listen to the recording, select
Playback”, then press {SELECT}.
LTo re-record, select “Retry”, press
{SELECT}, then start from step 5.
8Savei {SELECT}
9Enter the desired name (max. 15
characters; page 21).
10 {SAVE} i {OFF}
11 Disconnect the audio cable from the
handset.
Note:
LThe total recording time is about 120
seconds.
Playing back a song
1{MENU} (center of joystick) i f
i {SELECT}
2Customize ringi {SELECT}
3Playbacki {SELECT}
4Select the desired song. i {PLAY}
5{STOP} i {OFF}
Erasing a song
While the song is selected or playing,
press {ERASE}, then press {YES}.
Note:
LIf the erased song was used for the
handset ringer tone (page 31), “Tone 1
or “Tone 2” (default) is used instead of
that song.
LIf the erased song was assigned to
certain callers as ringer ID (page 24), the
ringer ID assignment is canceled, and
the handset ringer tone (page 31) is
used instead of that song.
Audio device

Audio cable

Headphone

output, line

out, etc.

Example:

THA11.book Page 32 Tuesday, March 7, 2006 5:56 PM