Programmable Settings
For assistance, please visit http://www.panasonic.com/phonehelp 35
Caller ID number auto edit
You can turn the Caller ID number auto
edit feature on or off.
1{MENU} (center of joystick) i h i
{SELECT}
2“Caller ID edit” i {SELECT}
3Select the desired setting. (Default:
“On”) i {SAVE} i {OFF}
Setting telephone line
Line selection
The line selection mode determines which
line is selected when you press {C}.
–“Auto”: When making a call, line 1 is
selected. If that line is unavailable, line 2
is selected. When answering a call, the
ringing line is selected.
–“Line1”: Line 1 is selected.
–“Line2”: Line 2 is selected.
1{MENU} (center of joystick) i h i
{SELECT}
2“Set tel line” i {SELECT}
3“Line select” i {SELECT}
4Select the desired setting. (Default:
“Auto”) i {SAVE} i {OFF}
Note:
LYou can select a line manually
regardless of the line selection mode by
pressing {LINE1} or {LINE2}.
Dialing mode
If you cannot make calls, change this
setting depending on your telephone line
service.
“Tone”: For tone dial service.
“Pulse”: For rotary pulse dial service.
LYou only need to program this setting
once, using either the handset or base
unit.
1{MENU} (center of joystick) i h i
{SELECT}
2“Set tel line” i {SELECT}
3“Set dial mode” i {SELECT}
4Select the desired setting. (Default:
“Tone”) i {SAVE} i {OFF}
Flash time
The flash time depends on your telephone
exchange or host PBX.
LYou only need to program this setting
once, using either the handset or base
unit.
Important:
LThe setting should stay at 700 ms unless
pressing {FLASH} fails to pick up the
Call Waiting call.
1{MENU} (center of joystick) i h i
{SELECT}
2“Set tel line” i {SELECT}
3“Set flash time” i {SELECT}
4Select the desired line.
5Select the desired setting. (Default:
“700ms”) i {SAVE} i {OFF}
Note:
LIf the base unit is connected via a PBX,
certain PBX functions (call transferring,
etc.) may not work correctly. Consult
your PBX supplier for the correct setting.
THA11.book Page 35 Tuesday, March 7, 2006 5:56 PM