Panasonic PT-LB1E, LB1U, LB1EA manual Using WebBrowser cont, „„E-mail set up, „„Ping test

Using WebBrowser (cont.)

„„E-mail set up

You can specify two email recipients.

Click [Detailed set up] → [E-mail set up] in the menu.

•• [MAIL SERVER]

ENABLE :Enable or disable email transmission.

SMTP SERVER NAME : Enter the SMTP server name.

•• [MAIL OPTION]
MAIL FROM :	Enter the sender’s email address.
MEMO :	Enter a description of the sender.

•• [TEMPERATURE WARNING SET UP]

MINIMUM TIME : Enter the interval for sending email.

INPUT AIR TEMPERATURE :Select the temperature of the intake sensor at which to send a warning message.

•• [E-MAIL ADDRESS]

E-MAIL ADDRESS : Enter the email addresses of the recipients.

MAIL CONTENTS : Change the type of message as desired.

When sending messages to mobile phones, select “SIMPLE”.

ERROR :Select ON to send email when errors occur.

LAMP RUNTIME : Select ON to send email when “at REMAIN” is reached.

INPUT AIR TEMPERATURE :Select ON to send email when the temperature set in [TEMPERATURE WARNING SET UP] is exceeded.

PERIODIC REPORT : Send a message with the projector status at the selected date and time. When [submit] is clicked, the settings are applied.

Consult your system administrator on MAIL SERVER and E-MAIL ADDRESS settings.

„„Ping test

You can confirm if a network connection is established with Mail server,

POP server, DNS server or the like.

Click [Detailed set up] → [Ping test] in the menu.

Input IP address : Enter the IP address of the server you want to test, and then click [Submit].

If succeeded in connection, the following display appears.

If failed in connection, the following display appears.

14